Ugee 1910B review with art program testing: affordable 19” tablet monitor delivers
19″ display, TFT panel
UC-Logic digitizer (uses EMR)
1440 x 900 resolution
2,048 levels of pressure sensitivity
Battery-free pen recharges from USB. Two pens included.
Pen has eraser/pen toggle button
Adjustable metal stand goes from 90 to about 20 degrees
Compatible with Windows XP on up and Mac. Works with 2d and 3d art software.
Can support dual monitors and has screen mapping
Pen does not have tilt or rotation sensitivity (nor do other Cintiq alternatives)
Pen has eraser/pen toggle button setting
Brightness: 300 nits
Contrast ratio: 800:1
Viewing angles to ~80/~80
5080 LPI (lines per inch)
220 RPS (revolutions per second)
Response time 5 ms
What’s in the Box
Ugee 1910B tablet monitor
Power adapter and cords: VGA, USB, power supply
Two pens, two pen charging cables
CD with driver
Screen protector (glossy)
Pen battery lasts at least 800 hours
Compatible with Windows XP/Vista/7/8/8.1/10 and latest Mac OS
Weight: 15 lbs.
Dimensions: 20.9 x 18.3 x 7.2 inches
Active display area: 19”
Packaging and setup
Ugee is a Chinese company and, like Yiynova, Huion, and others, makes lower-cost tablets that are alternatives to the Wacom Cintiq. This is an an Ugee 1910B review.
This model is among the most economical of the Cintiq alternatives for its size. It’s a tablet monitor that attaches to your computer. It works with Windows and Mac. You can also use it as a regular monitor and attach it to a TV or projector.
This was my first time trying an Ugee.
The tablet monitor came safely packaged in cardboard, with a hard backing, and styrofoam. The inner cardboard box having a handy handle. The packaging is not fancy—it’s no-frills, and the savings are passed along to us.
The boxes open vertically rather than like a clamshell. Inside, along with all the cords, are some nice extras: a drawing glove, screen protector, and extra pen and cord. The screen protector is in a separate package.
Setting up the Ugee 1910B
The USB and cables are each about four feet long, and the power supply about 6 feet long. The power brick is pretty small and compact (about 5” long, 2” wide and 1.5” thick) and stays cool. The pen cords are about 3 feet long.
The cables are relatively simple to set up (no splitters or confusion as to what goes where) and do not produce cord tangle–I was grateful for that. There is VGA, but no HDMI support. You can use a VGA to HDMI adapter if needed.
The cords are in back near the bottom, which makes them a little hard to access, but once set up, they are out of the way both physically and visually. The cords are long enough for me, but it depends on your setup.
You plug the tablet into a wall outlet or surge protector, and connect the 15-pin VGA to your computer or use an adapter for HDMI—most newer computers use HDMI. You also connect the tablet to your computer’s USB tablet, and charge the pen via USB as well.
Installing the Ugee driver
The drivers support Windows 10, even though the info in the paper booklet doesn’t go up that high. The driver comes on an included CD, but I used the ones from the Ugee site. You can use anything from XP to Windows 10. It also works on the latest Mac OSX (and I am checking with the company about older Macs).
You have to delete all tablet drivers and any remnants of them before installing. You connect all the cables, including the USB, with the computer and tablet turned off, then install the driver, then reboot.
Once installed, the driver icon stays in its folder rather than appearing on the desktop, so you need to open the folder and click on it.
If your screen is high-resolution, you will need to set the monitor to Extend mode. If your resolution is the same as or lower than the Ugee’s, then set it to Duplicate. If you are getting a big offset, this setting is the first thing you need to look at.
I tested it using my tablet PC and it worked fine with that; as with other tablets, using a penabled computer does not cause a conflict.
Since I did have remnant files from other drivers, I at first got the dreaded “other tablet drivers detected” error. What solved it for me was going into the Windows folder and deleting two files, a fix I quickly found online after doing a search for the text of the error message. If you have never installed another tablet, then you should not have a problem installing.
The pen calibration and pressure sensitivity worked great out of the box for me and required no adjustments.
The Ugee is black plastic and attractively designed. It’s not all that thick, but it feels solid. While it’s not lightweight, it’s not hard, if you’re of average strength, to carry it around the room. I would not want to carry it around town or anything.
The stand is also plastic (though it resembles metal) and uses a latch system to lock in place. It adjusts from 90 degrees to back to about 20 degrees—which is the best angle, ergonomically, to draw on.
The stand is attached and stable at any position. The tablet is VESA-compatible, so you could use a mounting arm. The tablet sits about two inches off the table surface. The bottom of the stand has four rubber bumpers.
The glossy screen is flat glass all the way up to the ends. There is no raised bezel, only a black frame that’s a bit less than an inch wide, making good use of the screen real estate. You could use a ruler or template on it if you want—makes it easy to make stencils.
Or. if you have done your line art on paper, you can use it as a light box by laying your drawing over it and tracing over it to transfer your drawing, which can be useful in retaining a loose line quality. (You can do this even with a raised bezel, but it’s easier with this flat setup).
The glossiness of the screen makes colors look brighter. Thanks to the flat glass, if you want to use a different screen protector, such as a matte one to get some paperlike tooth, you don’t need to worry about cutting it to fit within the bezel.
The protector covers the active area and a bit beyond. I installed it and got some bubbles that I’m working on getting rid of. The pen doesn’t scratch the tablet if you do not put on the protector, so you may prefer to go bare-screened. If you wear the glove it will stop smudging and moisture. The protector does not affect drawing or the visibility.
There is a slight, very rare squeak with some pen strokes with the screen protector off, but the squeak is a lot less than on some tablet monitors, and it tends to go away after a while—it’s that new-tablet sound.
The display resolution is not high, so things are bit pixelated. Because of the large size, the pixelation is noticeable, and text is a little fuzzy. It’s not lower-res than the Cintiq 12ux or the original iPad, but at this large size, it is more noticeable. This is really my only sticking point. However, higher resolution would mean a higher price and I don’t see it as a dealbreaker. You can still see your art on whatever computer or second monitor you are using.
The viewing angles seem best straight on; this is not an IPS screen. But you don’t get blind spots or anything from other angles, you can see what’s on the screen. If you move around a lot the image becomes a little less clear from certain angles, but chances are you will be drawing from right in front of it. The stand does not swivel, it only goes up and down, the but if you want to turn the monitor it’s not terribly heavy.
Palm resolution works well; I didn’t have any issues with that or the hover distance.
The Ugee pen has a good weight, not too heavy. It’s a little chunky, with a thin part near the tip. It’s thicker than a fountain pen. It’s light enough to not cause fatigue but heavy enough to give a good balance. With my small hands I could stand it to be slightly thinner, but it’s less thick than some of the other tablet pens out there. All in all, I like the pen.
There is a slight parallax (space between pen and screen), but not enough to bother me at all—maybe 1/10th of an inch. In fact I like it seeing the whole line instead of any of it being blocked by the pen.
You will need to use a USB port to charge the pen for about 45 minutes, and a USB cord to connect the monitor. A blue LED light stays on until the pen is fully charged. If you don’t have an extra port, you can charge the pen via a power bank or another device—or simply charge the pen then remove it.
The company says the pen battery lasts a minimum of 800 hours. I haven’t had it that long. There is no need to pair, as no Bluetooth or other wireless signals are involved.
The pen does not have an eraser end but the 3-way button (front, back, and left click) has a pen/eraser toggle and some choices of settings, including and the choice of absolute positioning, or relative (mouse mode).
With absolute mode, the cursor goes where you touch the pen to the screen. I left it on absolute, as it’s desirable for a tablet, unless you have a reason to use mouse mode. The driver also lets you set pen sensitivity and after some testing I put that around the middle, slightly to the harder side.
The Ugee comes with a manual that’s pretty basic and takes you through the steps of installation, settings, and basic troubleshooting.
In Windows 10 you can do a little bit further pen customization by going to Settings > Devices > Pen & Windows Ink.
Drawing on the Ugee 1910B
One happy surprise about UC-Logic drivers is their excellent responsiveness, which I find comparable or better than other digitizers, including Wacom’s. The Ugee’s driver has a comfortable pressure curve and seem to maximize line variation. You can get very thin, interesting lines, similar to using a ballpoint pen.
The driver includes a small test area where you can make adjustments. You can get a very thin line, like drawing with a fine ballpoint pen. Inking feels very fluid.
As mentioned above, there is a small amount of parallax, maybe 1/10” of an inch, with the cursor being a little under the pen. I do not mind this as I like to see where the cursor is. If it were larger, I would mind, but it’s pretty small. I drew around the edges and did not get jitter regardless of speed or direction.
I also did not get lag when drawing, no matter how fast. I did get lag, though if I stopped drawing for a few minutes. Putting the pen back on the tablet apparently wakes the pen up, but sometimes would result in it drawing a random line, which I fixed with a simple Undo command.
The screen is glossy, so colors appear bright and contrast is enhanced. The screen is smooth glass, with no tooth. The included screen protector is also glossy. The protector does not affect drawing.
You can do monitor mapping with the driver and set up multiple monitors.
Buttons are all along the bottom of the monitor, there are none on the sides. The “menu” button lets you make changes to positioning, color temperature, contrast, and other parameters. There is not a lot of customization to the drivers. If you want express keys, you could try a gaming tablet, Photoshop Actions, the Tablet Pro app, or a radial menu.
Cables simple to set up (no splitters and such)
VESA-compatible (meaning you can attach it to VESA stand, so it can go on a wall or mounting arm)
Excellent pressure curve and pen sensitivity
Good build quality
Comes with useful extras, such as glove and screen protector
uses EMR, a sensitive digitizer system allowing excellent drawing control
Screen shows some pixelation
Color accuracy is imperfect
Driver installation ease varies
Pen takes a moment to “wake up” if you pause drawing
Ugee 1910B vs. Wacom Cintiq
There are a lot of things that pricey Cintiqs has that this doesn’t, including multitouch–so you can’t use your hands on it, nor finger paint or gestures. The drivers have a lot less customization, and there are also no programmable express keys either on the monitor or on-screen.
You can only get pressure sensitivity in Adobe Illustrator using Wacom tablets, so you will not get it with the Ugee, but you will get it in other Adobe programs. All this is standard for Wacom alternative tablets.
I’ve looked at Ugee 1910B reviews in different places, and this seems overall to be a pretty well-liked tablet, with praise for the pressure curve. On the negative side, some people have technical issues with the drivers and aren’t happy with the help they’ve received. Occasionally there are issues with the pens ceasing to work, which could be from the battery.
The company seems to issue replacements of the tablet, pens, or parts when needed. In my own contact with Ugee, they responded quickly and helpfully—though my contact was with the general rep, not tech support. They do not seem to have elaborate customer support with screen sharing, but most places don’t. They have a Facebook page where you could upload images or videos if you’re having problems, and they can also be reached via email or Skype (or WeChat if you use that).
The verdict for this Ugee 1910B review is that it’s a very good deal for something this affordable. It works well, with the pressure curve being comparable to or superior to Wacom. It does not have all the features of a Wacom, but it’s similar to other Cintiq alternatives.
The screen resolution being a bit low, and the colors not super accurate, but you can check against your computer monitor.
The Ugee is a fine choice for artists on a budget, for students, or beginners wanting to try a tablet monitor without a big investment. While you may want to eventually invest in a Cintiq, this is a fun and solid drawing tablet with a screen.
Check price and read more Ugee 1910B reviews on Amazon
Link will take you to the local Amazon store for where you’re located.
End of Ugee 1910B review